location icon
Butler Ebensburg Martinsburg New Alexandria Somerset
Location Hours
Butler Ebensburg Martinsburg New Alexandria Somerset
Email icon
Phone icon
Butler: 724-283-6659 Ebensburg: 814-846-5976 Martinsburg: 814-793-2109 New Alexandria: 724-668-7172 Somerset: 814-445-6500
TikTok YouTube Instagram
Buy Online

Buy Online


Equipment
Parts
map
map

Yield Documentation Specialty Crops

Yield Documentation, Specialty Crop enables producers to document harvest information from weight-based, conveyor driven harvesting equipment. Typical uses include harvesting potatoes, onions, and sugar beets, but is not limited to those crops.

Data can be easily transferred to the John Deere Operations Center application via Wireless Data Transfer (WDT) or USB for further analysis around yield, load tracking, and agronomic impacts for nutrient removal and residue levels.



Required components:
  • G5 Display or:
  • 4600 CommandCenter or 4240/4640 Universal Display with 19-2 software update or:
  • GreenStar 3 2630 Display
  • Yield Documentation, Specialty Crop (UCC2 Application Controller, StellarSupport™ activation, UCC2 Application Controller to controller area network [CAN] bus harness)
  • StarFire 7000 or StarFire 6000 or StarFire 3000 Receiver
  • Third-party yield controller sending RS232 data via UCC2 Application Controller connection
NOTE: Yield Documentation, Specialty Crop harvest data is only compatible with the John Deere Operations Center.
Machine compatibility
John Deere Large Ag Tractors
John Deere Large Ag Tractors
(list of all automatically detected machines)		 Model year CommandCenter Universal Display 
4600 v2 4200  G5 G5Plus 4640 4240 G5  G5Plus
9R/9RT/9RX Series 2024 and newer X --- --- X X X X X
9R/9RT/9RX Series 2018-2021 X --- --- --- X X X X
9R/9RT/9RX Series 2015-2017 * --- --- --- X X X X
9R/9RT Series 2012-2014 --- --- --- --- X X X X
9030/9030T Series 2008 and newer --- --- --- --- X X X X
9020/9020T Series 2002-2007 --- --- --- --- X --- X X
9000 Series 1997-2001 --- --- --- --- X --- X X
9000T Series 2000-2001 --- --- --- --- X --- X X
8R/8RT/8RX Series 2024 and newer X --- --- X X X X X
8R/8RT Series 2018-2020 X --- --- --- X X X X
8R/8RT Series Mid-2014 - 2017 * --- --- --- X X X X
8R/8RT Series 2010-2013 --- --- --- --- X X X X
8030/8030T Series 2006 and newer --- --- --- --- X X X X
8020/8020T Series 2002-2005 --- --- --- --- X --- X X
8010/8010T Series 2000-2002 --- --- --- --- X --- X X
8000 Series 1994-1999 --- --- --- --- X --- X X
8000T Series 1997-1999 --- --- --- --- X --- X X
7R Series 2024 and newer X X X X X X X X
7R Series 2018-2023 X X --- --- X X X X
7R Series 2014-2017 * --- --- --- X X X X
7R Series 2011-2013 --- --- --- --- X X X X
7J Series 2018 and newer --- --- --- --- X X X X
7M Brazil 2024 and newer --- --- --- --- X X X X
7030 Series 2007 and newer --- --- --- --- X X X X
7030 Series (Large Frame) 2007 and newer --- --- --- --- X X X X
7030 Series (Small Frame) 2006 and newer --- --- --- --- X X X X
7020 Series 2003-2007 --- --- --- --- X X X X
6030 Series (Small Frame) 2006 and newer --- --- --- --- X X X X
6R Series 2024 and newer --- --- X X --- --- X X
6R Series 2018-2023 X X --- --- X X X X
6R Series (Final Tier 4) 2015-2017 * --- --- --- X X X X
6R Series (Interim Tier 4) 2013-2015 --- --- --- --- X X X X
6M Series 2013 and newer --- --- --- --- X X X X
6J Series 2018 and newer --- --- --- --- X X X X
5R Series 2019 and newer --- --- --- --- X X X X
*NOTE: For latest Precision Ag functionality, update machines equipped from the factory with v1 processor to v2.

John Deere Nutrient Applicators

John Deere Nutrient Applicators

 Model year CommandCenter
 Universal Display
4600 v2 4200 G5 G5Plus 4640 4240 G5 G5Plus
F4365 High-Capacity Nutrient Applicator 2017 and newer X --- --- --- --- --- --- ---

John Deere Self-Propelled Sprayers
John Deere self-
propelled sprayers		 Model year CommandCenter
 Universal Display 
4600 v2 4200 G5 G5Plus 4640 4240 G5 G5Plus
400 and 600 Series Sprayers/4023 2022 and newer X --- --- --- --- --- --- ---
4 Series Sprayers 2018 - 2021 X --- --- --- --- --- --- ---
4 Series Sprayers  2013 - 2017 --- --- --- --- X** --- --- X**
4940 2012 - 2014 --- --- --- --- X** --- --- X**
4630 2008 and newer --- --- --- --- X** --- --- X**
4730 2008 and newer --- --- --- --- X** --- --- X**
4830 2008 - 2014 --- --- --- --- X** --- --- X**
4930 2008 - 2013 (serial number 4000+) --- --- --- --- X** --- --- X**
4720, 4920
 2004-2007 --- --- --- --- X** --- --- X**
Hagie™ sprayers 2014 and newer Compatible with GreenStar™ 3 2630 Displays and 4640 Universal Displays*    
*NOTE: When using the 4640 Universal Display on a Hagie Sprayer, additional mounting and harnessing may be required.
  • 4640 RAM™ mount - SJ34503
  • 4640 power/video harness - BPF11527 (1-3 video plus machine power), PF90687 (machine power only)
NOTE: Current John Deere/Hagie field kits only offer GreenStar 3 2630 Display parts.

NOTE: Multi-rank section control are not supported on Hagie at this time.

NOTE: VIN detection on Hagie Sprayers is only supported on model year 2019 and newer machines.
NOTE: 22-2 and newer software allows the Gen 4 4640 Universal Display to control the Hagie/Montag Fortifier configuration.

**NOTE: The 4640 Universal Display will replace the GreenStar 3 2630 Display on the armrest. Dual display with the GreenStar 3 2630 Display is not supported with sprayers. The 4640 Universal Display does not use the external display navigation buttons located on the armrest, so these buttons are disabled in this configuration.

John Deere Self-Propelled Forage Harvesters (SPFH)

John Deere SPFH

 Model year CommandCenter Universal Display
4600 v2 4200 G5 G5Plus 4640 4240 G5 G5Plus
9000 Series SPFH 2019 and newer --- --- --- --- X --- --- X
8000 Series SPFH 2015 and newer --- --- --- --- X --- --- X
 
NOTE: When adding the 4640 Universal Display to a John Deere SPFH, it will only be compatible as a precision ag display and is installed on the side rail.

John Deere Combines
John Deere Combines Model year CommandCenter
 Universal Display
4600 v2 4200 G5 G5Plus 4640 4240 G5 G5Plus
X9 Series 2024 and newer --- --- --- X --- --- --- ---
X9 Series 2021-2023 X --- --- --- --- --- --- ---
S700 Series 2024 and newer --- --- --- X --- --- --- ---
S700 Series 2018-2023 X --- --- --- --- --- --- ---
S430 and S440 2024 and newer --- --- X --- --- --- --- ---
S430 and S440 2017-2023 X --- --- --- --- --- --- ---
S600 Series 2012 - 2017 --- --- --- --- X* X* X* X*
S540 and S550 Series
 2024 and newer --- --- --- --- --- --- --- X*
S540 and S550 Series 2012-2023 --- --- --- --- X* X* X* X*
T-Series 2012 and current --- --- --- --- X* X* X* X*
70 Series 2008 - 2013 --- --- --- --- X* X* X* X*
60 Series 2004 - 2007 --- --- --- --- X* --- --- X*
50 Series 2000 - 2003 --- --- --- --- X* --- --- X*
NOTE: Competitive equipment may be compatible with 4640 Universal Display and 4240 Universal Display.

*NOTE: When adding the 4640 Universal Display to a John Deere combine, it will only be compatible as a cornerpost precision ag display.

NOTE: RowSense™ sensor voltage readings and sensor offsets are displayed on Original GreenStar Monitor emulator on 50, 60, and 70 Series Combines.

John Deere Cotton Harvesters
John Deere
Cotton Harvesters		 Model year CommandCenter
 Universal Display
4600 v2 4200 G5 G5Plus 4640 4240 G5 G5Plus
CP770 2024 and newer --- --- --- X --- --- --- ---
CP770 2022-2023 X --- --- --- --- --- --- ---
CS770 2024 and newer --- --- --- X --- --- --- ---
CS770 2022-2023 X --- --- --- --- --- --- ---
CP690 2015 and newer --- --- --- --- X --- --- X
CS690 2015 and newer --- --- --- --- X --- --- X
NOTE: Update cab controller software to the latest version on model year 2017 and newer cotton harvesters to use Harvest Identification, Cotton Pro.

NOTE: When adding the 4640 Universal Display to a John Deere Cotton Harvester, it will only be compatible as a cornerpost precision ag display.

John Deere Self-Propelled Windrowers

John Deere Self-Propelled
Windrowers

 Model year CommandCenter
 Universal Display
4600 v2 4200 G5 G5Plus 4640 4240 G5 G5Plus
W235 2014 and newer --- --- --- --- X X X X
W260 2015 and newer --- --- --- --- X X X X
W110 to W170*       --- --- X X X X
NOTE: When adding the 4640 Universal Display to a John Deere self-propelled windrower, it will only be compatible as a cornerpost precision ag display.
*NOTE: For 22-2, a virtual windrower option is available to support W110 to W170 Self-Propelled Windrowers. VIN detection is not available on these machines.
Equipment compatibility
John Deere planters

SeedStar™ 4HP planters are only compatible with 4600 CommandCenter displays with a version 2 (v2) processor and 4640 Universal Displays. Displays should be running the most current version of tractor applications to be compatible with SeedStar 4HP planter applications. Additionally, dual-display mode is available for use with SeedStar 4HP planter applications, along with Generation 4 Extended Monitor. SeedStar 4HP planters are compatible with no more than two GreenStar Rate Controllers.

The SeedStar 2 configuration below is available only on factory-installed model year 2011 and newer planters and may be field-installed on model year 2009 and 2010 planters. Green PM/PA controllers (factory-installed on model year 2009 and 2010 planters) are not supported with a Generation 4 display.

Service ADVISOR™ is needed to update SeedStar 2, SeedStar XP, and SeedStar 3 HP software. Documentation is not supported when using a rate controller to control row clutches on a John Deere planter.
 
John Deere planters Control unit name Software version (or newer) CommandCenter
 Universal Display
4600 v2 4200 G5 G5Plus 4640 4240* G5 G5Plus
SeedStar 2
 Black PM1 22.0 X X X X X X X X
Black PA1, (if available PA 2) 22.0 X X X X X X X X
Green PM1 10.11 --- --- --- --- --- --- --- ---
Green PA1 (if available PA 2) 10.11 --- --- --- --- --- --- --- ---
SeedStar XP
 Black PM1 22.0 X X X X X X X X
Black PA1, (if available PA 2) 22.0 X X X X X X X X
PM2 7.0 X X X X X X X X
SeedStar 3 HP
 Planter Main A (PCMA) 6.0 X X X X X X X X
Planter Main B (PCMB or MMC) 8.0 X X X X X X X X
Row-unit Controller (RUC) 2.0 X X X X X X X X
EPG 3.0 X X X X X X X X
SeedStar 4HP
 Planter Apps 10.4.332-12 X --- X X X --- X X
Planter Main A (PMCA) 6.0 X --- X X X --- X X
Planter Main B (PMCB or MMC) 10.0 X --- X X X --- X X
Row-unit Controller (RUC) 4.0 X --- X X X --- X X
Electrical Power Generation (EPG) 5.0 X --- X X X --- X X
Electrical Power Module, 2 (PC2) 4.0 X --- X X X --- X X
ExactRate™ liquid fertilizer system Master Nozzle Control Unit (MNC) 2.0 X --- X X X --- X X
Spray Rate Control Unit (SRC)  2.0 X --- X X X --- X X
Liquid Blockage Controller (LBC) 2.0 X --- X X X --- X X
Nozzle Control Unit (NZC) 6.04 X ---   X X --- X X
ExactRate app  10.1.269-64 X ---   X X --- X X
*NOTE: For implements requiring ground speed input (radar), utilizing a 4240 Universal Display may require an additional 4240 radar speed kit.

John Deere Air Seeders

The C650 and C850 Air Carts and N500C Seeder are not supported with a GreenStar 3 2630 Display. Additionally, tow-behind C850 Air Carts are compatible with AutoTrac™ Implement Guidance (passive) with software update 18-2 and newer.
 
John Deere Air Seeder Model year/control unit name Software version (or newer)  CommandCenter
 Universal Display
4600 v2 4200 G5 G5Plus 4640 4240* G5 G5Plus
C650/850 Air Cart
 Cart Master Controller (CMC) 3.0 X X X X X X X X
Mini Tank Controller (TCX) 2.0 X X X X X X X X
Front, Middle, Rear Tank Controller (TCU) 2.0 X X X X X X X X
1870 Seeding Tool - TruSet™ system 2017 and newer (IDC) 5.0 X X X X X X X X
1870 Seeding Tool - RelativeFlow™ blockage sensors 2017 and newer (BMU) 6.0 X X X X X X X X
1910 Air Cart - ground drive 2009 and newer 3.0 X X X X X X X X
1910 Air Cart - hydraulic drive
 2013 and newer 11.0 X X X X X X X X
Seeding tools with air-run blockage - primary blockage
 2009 and newer (BMU) 12.0 X X X X X X X X
Seeding tools with air-run blockage - air-run blockage 2009 and newer (BMU) 12.0 X X X X X X X X
Member Module 5.0 X X X X X X X X
1990 Central Commodity System (CCS™)
 2009 and newer (BMU) 12.0 X X X X X X X X
N500C Series Seeder apps 10.2.19-13 X --- X X X --- X X
SMCA or SMC 4.0 X --- X X X --- X X
SMCB or BMU 3.0 X --- X X X --- X X
EPG 3.0 X --- X X X --- X X
*NOTE: For implements requiring ground speed input (radar), utilizing a 4240 Universal Display may require an additional 4240 radar speed kit.

John Deere Tillage
John Deere Tillage Control unit name Software version (or newer)  CommandCenter
 Universal Display
4600 v2 4200 G5 G5Plus 4640 4240 G5 G5Plus
AccuDepth™ cultivator Implement Depth Control (IDC) 11 X X X X X X X X
2730 with TruSet
 Tillage Controller 1 (TC1) 2.66K9 X X X X X X X X
2230 with TruSet Tillage Controller 1 (TC1) 2.75K6 X X X X X X X X
2330 with TruSet Tillage Controller 1 (TC1) 2.35K6 X X X X X X X X
2620/2630 with TruSet Tillage Controller 1 (TC1) 2.95K6 X X X X X X X X
2720 with TruSet Tillage Controller 1 (TC1) 2.24K6 X X X X X X X X
2660VT with TruSet Tillage Controller 1 (TC1) 3.03K12 X X X X X X X X
2430 with TruSet Tillage Controller 1 (TC1) 2.14K4 X X X X X X X X
2510H with TruSet Tillage Controller 1 (TC1) 2.85K5 X X X X X X X X
*NOTE: For implements requiring ground speed input (radar), utilizing a 4240 Universal Display may require an additional 4240 radar speed kit.

John Deere Round Balers
John Deere Round Balers Control unit name Software version (or newer) CommandCenter
 Universal Display
4600 v2 4200 G5 G5Plus 4640 4240 G5 G5Plus
0 Series Baler Automation 10.07 X X X X X X X X
9 Series Premium
 Baler Automation 7.16 X X X X X X X X
V451R/V461R  Baler Automation 11.5 X X X X X X X X
 
 

John Deere Large Square Balers
John Deere Large Square Balers
Including Harvest Tec applicator and PhiBer accumulator		 Control unit name Software version (or newer) CommandCenter
 Universal Display
4600 v2 4200 G5 G5Plus 4640 4240 G5 G5Plus
0 Series Gen 4 VT 3.04 X X X X X X X X
1 Series
 Gen 4 VT 5.07 X X X X X X X X
Precision Ag Technology software compatibility
John Deere control units Control unit name Software version (or newer) CommandCenter Universal Display
4600 v2 4200 G5 G5Plus 4640 4240 G5 G5Plus
*StarFire 6000 Receiver --- 4.50P X X X X X X X X
StarFire 6000 Integrated Receiver --- 4.50P X X X X X X X X
StarFire 3000 Receiver --- 2.80S X X X X X X X X
*Modular Telematics Gateways (MTG) - 3G --- 21.03 X X X X X X X X
*MTG - 4G --- 27.01.541 X X X X X X X X
GreenStar Rate Controller --- 3.70K X X X X X X X X
GreenStar Rate Controller Dry --- 2.11A X X X X X X X X
*John Deere Rate Controller 2000 --- 1.13A X X X X X X X X
*AutoTrac Universal 200 --- 2.30A --- --- --- --- X X X X
*AutoTrac Universal 300 --- 3.24L --- --- --- --- X X X X
AutoTrac Controller 300 --- 3.24L --- --- --- --- X X X X
AutoTrac Controller 250 --- 11933B --- --- --- --- X X X X
*AutoTrac Controller - Deere --- 1.11B --- --- --- --- X X X X
AutoTrac Controller - Raven --- 10.13.909-158 --- --- --- --- X X X X
AutoTrac Controller - Reichhardt® --- SW 1.3 --- --- --- --- X X X X
AutoTrac RowSense RG3 AKK15783H X --- X X X --- X X
AutoTrac Vision VGC 4.01V X --- X X X --- X X
AutoPath™ --- 20-3 X --- X X X --- X X
AutoTrac Turn Automation --- 19-3 X --- X X X --- X X
AutoTrac Implement Guidance --- 19-3 X --- X X X --- X X
Machine Sync --- 20-3 X --- X X X --- X X
Active Implement Guidance (VT) UCC2 Application Controller 2.71Z X X X X X X X X
UCC2 Application Controller (serial number PCXL01C201000-) 3.20A X X X X X X X X
iGrade™  UCC2 Application Controller 2.71Z X X X X X X X X
UCC2 Application Controller (serial number PCXL01C201000-) 3.20A X X X X X X X X
Distance Trip  UCC2 Application Controller 2.71Z X* X X X X X X X
UCC2 Application Controller (serial number PCXL01C201000-) 3.20A X* X X X X X X X
Yield Documentation, Specialty Crop  UCC2 Application Controller 1.51Y X X X X X X X X
UCC2 Application Controller (serial number PCXL02C201000-) 3.20A X X X X X X X X
Mobile Weather UCC2 Application Controller 1.51Y X X* X X X X* X X
UCC2 Application Controller (serial number PCXL02C201000-) 3.20A X X* X X X X* X X
Harvest Identification, Cotton UCC2 Application Controller 1.51Y --- --- --- --- X --- X X
UCC2 Application Controller (serial number PCXL02C201000-) 3.20A --- --- --- --- X --- X X
Earthmoving Productivity System
 UCC2 Application Controller 1.51Y --- --- --- --- X --- X X
UCC2 Application Controller (serial number PCXL02C201000-) 3.20A --- --- --- --- X --- X X
Gen 4 Extended Monitor     X --- --- --- X --- X X
Wireless Data Server Wireless Data Server 1.591.2 (Planting)
7.564.1
(Application)
2.573.1
(Harvesting)		 X --- X X X --- X X
Mobile Data Transfer MyTransfer™ app 3.8.6 (iOS®)
3.8.5 (Android™)		 X X X X X X X X
Connect Mobile app Connect Mobile app 8.4.0 or newer X --- X X X --- X X
Connect Mobile server Connect Mobile server 2.3.113-1 X --- X X X --- X X
Manure Constituent Sensing Manure Controller 19.06 X --- X X X --- X X
*NOTE: See additional information below.

StarFire Receivers

StarFire Receivers can be updated in the following ways:
  • Receiver USB port (available only for StarFire 6000 Receivers)
  • Generation 4 display USB port
  • Remote software updates application (in ISOBUS VT app)

John Deere Operations Center™ application

To use RDA on a Generation 4 CommandCenter Display with a GreenStar 3 2630 Display connected in the same machine, GreenStar 3 2630 software version 3.22.1095 (SU2014-1) or higher is required (for 4600 CommandCenter Display and 4640 Universal Display only).
/* Mailchimp */