You have more acres to harvest, which means starting harvest earlier – and sometimes at moisture higher than 32 percent – to get all your work completed on time. The solution is the CF and CR Corn Heads from John Deere. Available in a wide range of row spacings, these corn heads match the capacity of John Deere combines, letting you harvest up to 7,200 bu (253,721 L) per hour in high-yielding, dry corn. Additionally, you can harvest 65 more acres per day with a 16-row corn head compared to a 12-row corn head at the same ground speed.
Rota Disc is a trademark of Carl Geringhoff Vertriebsgesellschaft mbH & Co. KG
The sheer capacity boost you’ll experience with an X Series or S700 Combine paired with a John Deere CF Corn Head will help you pull a lot more bushels per hour out of your fields. A folding corn head can help reduce the time and effort you currently spend moving between and opening up fields. It eliminates the need for header trailers and running employees back and forth when changing between fields.
Rota Disc is a trademark of Carl Geringhoff Vertriebsgesellschaft mbH & Co. KG.
No cornfield is perfect. John Deere corn heads make the best even better by offering features to help you tackle any field without hesitation, no matter how imperfect the conditions might appear.
John Deere CF and CR Corn Heads are built to handle corn residue. You can start managing residue right away during harvest by appropriately sizing and distributing the residue evenly across your field to speed decomposition and improve soil warming to make planting manageable and effective.
Calmer is a trademark of Calmer Corn Heads, Inc. Lankota and Stalk Stomper are trademarks of Lankota Group, Inc.
You have little control over the challenges that weather can bring. Wind damaged crops are often blown down, hiding the rows and making it nearly impossible to see where to harvest. The AutoPath™ system addresses these issues by providing accurate guidance lines even when the crop rows cannot be seen.
Compare the specifications of up to 4 models
Key Specs | c16f-corn-head Current Model |
---|---|
Approximate overall width | With 50.8-cm (20-in.) row spacing: 8.5 m 27.75 ft With 55.9-cm (22-in.) row spacing: 9.24 m 30.33 ft With 76.2-cm (30-in.) row spacing: 12.3 m 40.33 ft |
Approximate folded width | With 50.8-cm (20-in.) row spacing: 5.3 m 17.5 ft With 55.9-cm (22-in.) row spacing: 5.87 m 19.25 ft With 76.2-cm (30-in.) row spacing: 6.3 m 20.75 ft |
Row spacings | 50.8, 55.9, or 76.2 cm 20, 22, or 30 in. |
Deck plate adjustment | Hydraulic adjustment |
Gathering chain adjustment | Spring loaded, self-adjusting |
Gathering chains | Heavy-duty, 620, endless steel roller chain with chromed pins (no master connecting link) |
Corn Head | |
Gathering points | Four-position, low-profile floating type hinged above gathering chains |
Center and outer gatherings | Hinged, quickly removable |
Gathering chains | Heavy-duty, 620, endless steel roller chain with chromed pins (no master connecting link) |
Minimum clearance between gathering chains and ground | 32 mm 1.25 in. |
Row unit drive | Enclosed, submerged-in-lubricant gearbox, driven by single input hexagon shaft |
Gathering chain adjustment | Spring loaded, self-adjusting |
Stalk rolls | Opposed, intermeshing, and chopping (two per row-unit) |
Deck plate adjustment | Hydraulic adjustment |
Slip clutch | One per row-unit plus auger drive |
Trash knives | Full-length, one-piece, heat-treated steel |
Stalk deflectors | Factory-installed option |
Dimensions | |
Approximate overall width | With 50.8-cm (20-in.) row spacing: 8.5 m 27.75 ft With 55.9-cm (22-in.) row spacing: 9.24 m 30.33 ft With 76.2-cm (30-in.) row spacing: 12.3 m 40.33 ft |
Approximate folded width | Points in operating position (lowered) With 50.8-cm (20-in.) row spacing: 2.9 m 9.67 ft With 55.9-cm (22-in.) row spacing: 2.9 m With 76.2-cm (30-in.) row spacing: 3 m 10 ft Points folded up (service position) With 50.8-cm (20-in.) row spacing: 2.3 m 7.5 ft With 55.9-cm (22-in.) row spacing: 2.3 m With 76.2-cm (30-in.) row spacing: 2.6 m 8.5 ft With 50.8-cm (20-in.) row spacing: 5.3 m 17.5 ft With 55.9-cm (22-in.) row spacing: 5.87 m 19.25 ft With 76.2-cm (30-in.) row spacing: 6.3 m 20.75 ft |
Approximate shipping weight (includes shipping skid) | With 50.8-cm (20-in.) row spacing: non StalkMaster™ 5123 or StalkMaster 5547 kg 11,294 or 12,227 lb With 55.9-cm (22-in.) row spacing: non StalkMaster 5212 or StalkMaster 5598 kg 11,490 or 12,341 lb With 76.2-cm (30-in.) row spacing: non StalkMaster 5627 or StalkMaster 6106 kg 12,405 or 13,462 lb |
Row spacings | 50.8, 55.9, or 76.2 cm 20, 22, or 30 in. |
Standard weight | With 50.8-cm (20-in.) row spacing: non StalkMaster 5123 or StalkMaster 5547 kg 11,294 or 12,227 lb With 55.9-cm (22-in.) row spacing: non StalkMaster 5212 or StalkMaster 5598 kg 11,490 or 12,341 lb With 76.2-cm (30-in.) row spacing: non StalkMaster 5627 or StalkMaster 6106 kg 12,405 or 13,462 lb |