New RT250 GEN:3

Track Loaders
REQUEST A QUOTE

More Info

RT250 GEN:3 Track Loader

  • Rated Operating Capacity at 35% Tipping Load (kg): 2,500 lbs. (1134)
  • Gross Power (kW): 74.3 hp (55.4)
  • Lift Height (mm): 128" (3251)

  • Gehl Compact Track Loader RT250 Specifications Diagram
  • Dimensions

    A  Overall Operating Height - Fully Raised 168"
    B  Height to Hinge Pin - Fully Raised 128"
    C  Reach - Fully Raised 34.5"
    D  Dump Angle - Fully Raised 41°
    E  Dump Height - Fully Raised 98"
    F  Maximum Rollback Angle - Fully Raised 102.5°
    G  Overall Height at ROPS 83.1"
    H  Overall Length with Bucket - Standard Counterweight 157.8"
    I  Overall Length without Bucket - Standard Counterweight 126.8"
    J  Specified Height 67.7"
    K  Reach at Specified Height 31.1"
    L  Dump Angle at Specified Height 75°
    M  Maximum Rollback Angle at Ground 30°
    N  Carry Position 8.2"
    O  Maximum Rollback Angle at Carry Position 31.6°
    P  Digging Position - Below Ground +0.5"
    Q  Angle of Departure with Standard Counterweight 25°
    R  Ground Clearance 13.2"
    S  Track Gauge 51.7"
    T  Track Shoe Width 17.7"
    U  Crawler Base 61.5"
    V  Overall Width - Less Bucket 69.5"
    W  Bucket Width 83.9"
    X  Clearance Radius - Front With Bucket 98.4"
    Z  Clearance Radius - Rear with Standard Counterweight 70.7"
    Maximum Rollback at Specified Height  66.8°
    Angle of Approach 90°
    Grouser Height 1"

    Capacity

    Operating Capacity at 35% Tipping Load 2,500 lbs.
    Operating Capacity at 50% Tipping Load 3,571 lbs.
    Tipping Load 7,143 lbs.
    Operating Weight 11,470 lbs.

    Engine

    Make/Model Deutz/TD 3.6 Tier 4
    Type 4-Stroke Turbo
    Displacement/Cylinders 221 cu.in./4
    Gross Power @ rpm 74.3 hp @ 2300
    Net Power @ rpm 70.7 hp @ 2300
    Peak Torque @ rpm 243 ft.-lbs. @ 1500
    Oil Pump Capacity 9 qts.
    Alternator Voltage/Amperage 14V/95A

    Track Drives

    Drawbar Pull/Tractive Effort 12,770 lbs.
    Track Type/Track Rollers/Roller Type Rubber/5/Steel
    Track Width 17.7"
    Ground Pressure 5.3 psi

    Forces

    Bucket Breakout - Tilt Cylinder 8,384 lbs.
    Bucket Breakout - Lift Cylinder 7,437 lbs.
    Ground Speed - Single Speed 5.8 mph
    Ground Speed - Two Speed 8.2 mph

    Volume

    Fuel Tank 24 gal.
    Hydraulic Reservior Tank 13.8 gal.
    Coolant Capacity 5.1 gal.

    Hydraulics

    Auxiliary Hydraulic Flow - Rated Speed 24.9 gpm
    High-Flow Hydraulic Flow - Rated Speed 37.4 gpm
    Transmission Pump Type Axial Piston
    Motor Type Axial Piston with Planetary Gear Box Reduction

    Electronic System

    Battery Volts 12V
    Cold Cranking Amps at Temperature 950 CCA @ 0°F