New RT175 GEN:3

Track Loaders
REQUEST A QUOTE

More Info

RT175 GEN:3 Track Loader

  • Rated Operating Capacity at 35% Tipping Load (kg): 1,750 lbs. (794)
  • Net Power (kW): 68.4 hp (51)
  • Lift Height (mm): 127.5" (3239)

  • Gehl RT175 Track Loader Specifications Diagram

Dimensions

A  Overall Operating Height - Fully Raised 168"
B  Height to Hinge Pin - Fully Raised 1278"
C  Reach - Fully Raised 34.5"
D  Dump Angle - Fully Raised 40.2°
E  Dump Height - Fully Raised 98"
F  Maximum Rollback Angle - Fully Raised 102.5°
G  Overall Height at ROPS 83"
H  Overall Length with Bucket - Standard Counterweight 144.0"
I  Overall Length without Bucket - Standard Counterweight 110.8"
J  Specified Height 67.5"
K  Reach at Specified Height 31.1"
L  Dump Angle at Specified Height 75°
M  Maximum Rollback Angle at Ground 30°
N  Carry Position 8.2"
O  Maximum Rollback Angle at Carry Position 31.6°
P  Digging Position - Below Ground +0.9"
Q  Angle of Departure with Standard Counterweight 30.4°
R  Ground Clearance 13.3"
S  Track Gauge 51.7"
T  Track Shoe Width 12.6"
U  Crawler Base 54.8"
V  Overall Width - Less Bucket 64.4"
W  Bucket Width 65.9"
X  Clearance Radius - Front With Bucket 91.4"
Z  Clearance Radius - Rear with Standard Counterweight 62.1"
Maximum Rollback at Specified Height  66.8°
Angle of Approach 90°
Grouser Height 1"

Capacity

Operating Capacity at 35% Tipping Load 1,750 lbs.
Operating Capacity at 50% Tipping Load 2,500 lbs.
Tipping Load 5,000 lbs.
Operating Weight 8,605 lbs.

Engine

Make/Model Yanmar/4TNV98C-NMSL Tier IV
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders 203 cu.in./4
Gross Power @ rpm 69.9 hp @ 2500
Net Power @ rpm 68.4 hp @ 2500
Peak Torque @ rpm 179 ft.-lbs. @ 1600
Oil Pump Capacity 11 qts.
Alternator Voltage/Amperage 14V/95A

Track Drives

Drawbar Pull/Tractive Effort 9,917 lbs.
Track Type/Track Rollers/Roller Type Rubber/4/Steel
Track Width 12.6"
Ground Pressure 6.2 psi

Forces

Bucket Breakout - Tilt Cylinder 5,354 lbs.
Bucket Breakout - Lift Cylinder 5,016 lbs.
Ground Speed - Single Speed 5.3 mph
Ground Speed - Two Speed 7.7 mph

Volume

Fuel Tank 24 gal.
Hydraulic Reservior Tank 11.0 gal.
Coolant Capacity 3.5 gal.

Hydraulics

Auxiliary Hydraulic Flow - Rated Speed 18.5 gpm
High-Flow Hydraulic Flow - Rated Speed 34.0 gpm
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Gear Box Reduction

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 850 CCA @ 0°F